Cowleys Pest Services Before & After Photos

These homeowners in South Plainfield, NJ had a squirrel infestation in their attic. Fortunately, our Little Rascals team safely retrieved the squirrels, relocated them to a new, humane environment, and properly sealed up their entry point. However, as often happens, the squirrels made a mess of the attic. There were toxic droppings throughout the attic. When these droppings dry out or are otherwise disturbed, particles can become airborne and circulate throughout the home. If breathed in, these microscopic spores can trigger serious respiratory diseases. In addition, as often happens, the sponge-like attic insulation becomes contaminated from animal waste.

So we removed all the old & contaminated insulation and then disinfected the attic. Once we finished, we added TruSoft blown-in cellulose insulation! TruSoft blown-in cellulose insulation has a higher R-value than standard fiberglass insulation, has the highest Class-1 fire safety rating, is resistant to mold and pests, and is eco-friendly!

A South River homeowner was having issues with mice in her basement and kitchen, and she contacted Cowleys. I was immediately dispatched to take care of the problem. During my inspection, I concentrated on finding signs of mouse activity such as droppings, rub/grease marks along walls, and loose nesting materials. I am also concerned about locating potential access points. With small rodents like mice, this can present a challenge. These animals are even smaller than they look because of their fur. A house mouse weighs less than an ounce, and can fit through a hole as small as a dime. It is especially important to inspect around the home’s foundation, both indoors and out. Mice, looking to escape the harsh outdoor elements during the winter, often enter homes through the basement or crawl space. 

Sure enough, during  my perimeter inspection, I saw that a pipe entering the exterior of the home into the basement was not adequately sealed. The openings around the pipe’s edges perfect for a mouse — the only thing missing was a welcome mat! There was no doubt that mice were exploiting this opening. Their “business card” — their droppings — were all over. There were pellets sprinkled at the base of the entry point as well as inside the hole itself. 

I showed the homeowner the source of her problem, and explained to her how I was going to get rid of her rodent infestation. She was extremely grateful. First, I patched the area around the pipe with rodent chew-proof knitted wire copper mesh. It is critical to find and seal the entry points. If you don’t, you can set up all the traps you want inside your home, and you still won’t permanently resolve the problem. Finding these small, often hidden or overlooked holes is time-consuming back-bending work, and it helps to know what to look for. We tend to see the same “hot spots” for rodent entry. Fortunately, the area around the pipe was the only observed gap during my inspection. 

I also placed several snap traps in those areas inside the home where there were indications of high rodent activity. This will get rid of any mice that may be still be lurking about, and these traps will also allow me to gauge whether there is still activity when I return for my two-week follow-up. At that time, I’ll re-inspect the home and perform any additional treatments as needed.

Recently, I was dispatched to a residence in South River, NJ. The homeowner was having a problem with yellow jackets. These wasps with their distinctive yellow-black coloration are one of the most territorial, aggressive stinging insects we come across. They seem almost anxious to sting at the slightest provocation.  

Although yellow jackets often nest outdoors in rodent burrows and other cavities, sometimes they decide to build nests inside homes. Decks, eaves, soffits, gutters, and even holes in brick are all potential yellow jacket nesting sites. Here, the wasps found an opening of a roof dormer soffit. The homeowner realized he had a problem because he was hearing buzzing and light scratching/clicking sounds in his upstairs ceiling. These wasps, as many wasp species, will chew on wood because cellulose makes for great nesting material. They are powerful enough to chew through drywall. These were some of the sounds that the homeowner was hearing. By the way, don’t knock on the drywall. It may be so paper thin that you’ll make a hole in it!

Upon arrival, I immediately inspected the exterior and observed yellow jackets entering and exiting the dormer soffit. I also saw a paper hood protruding out of the soffit that was clearly part of their nest. Yellow jackets build paper nests that are completely surrounded by a paper envelope. This paper-like pulp is a mixture of chewed wood fibers and their saliva. Inside, I inspected the upstair ceiling and found that the moisture from the nest had soften the sheetrock.

It was time to treat the nest. Because of the aggressive nature of these wasps, i don’t take any chances. I put on my protective suit with a hat and veil to protect me against any insect stings. When yellow jacket nests are first treated, you are often “greeted” by a swarm of angry, aggressive wasps. A individual yellow jacket can sting multiple times, so f a nest is disturbed you can be facing dozens of painful stings. For obvious reasons, active yellow jacket nests, especially those built in challenging locations, are not DIY homeowner projects. 

I climbed on the roof and used an extension pole sprayer so I could keep as safe a distance as possible from the nest, and injected a dust into the soffit opening. The dust will be shared with all of the members of the nest and it won’t take long for the queen and the rest of the colony to be eliminated.

I was recently sent to a home in Edison, NJ for a Cowleys home protection plan (HPP) scheduled service. The homeowner had issues with rodents around the home and I found out why she was concerned.

In my inspection, I found an exterior rodent bait station by the shed that was completely depleted from the last service. The interior rodent bait stations in the garage and crawl space were also empty.

After completing the service around the home I rebaited all the existing bait stations. I then performed a thorough inspection around the house to determine how the rodents were entering the structure. I found a sizable gap around the piping where the gas line was passing through the foundation. To close up this access point, I used a copper mesh material which does not rust or disintegrate like steel wool. 

Since this customer's rodent pressure was so high. I added an additional large rodent bait station (LP) to the exterior of the home.

A couple in Manalapan, NJ had a major issue with foxes living underneath their deck. We were sent out, inspected the entire area, and set-up our devices to safely retrieve the fox family. Shortly after setting up trapping, the foxes were safely retrieved and we relocated them to a new, humane location.

Although the foxes were safely removed, that was only half the battle. The deck area was still vulnerable for future intrusions from foxes and other nuisance wildlife.

To fix this, we dug a trench around the entire perimeter of the deck area that was 1 ft deep and 1 ft out from the bottom of the deck and then installed hardware cloth. This creates a sturdy "L shaped" perimeter that the foxes (and other nuisance wildlife) are unable to dig through. 

Once we finished installing the hardware cloth, we installed lattice around the entire perimeter of the deck. Now the deck is not only protected from future intrusions from any nuisance wildlife, but it looks aesthetically pleasing as well.