Cowleys Pest Services Before & After Photos

A short while ago, our Nuisance Wildlife Removal team recently came out to this home in Monroe Township, NJ to safely remove bats in the attic. Although the bats were safely removed and relocated to a new, humane location, they left behind a huge mess and contaminated the fiberglass insulation. At the owners request, we carefully removed all the old fiberglass insulation, cleaned the area, and then added over 12 inches of TruSoft blown-in cellulose insulation.

TruSoft cellulose insulation is a safe, non-toxic type of insulation that is 85% composed of recycled material and will reinforce the barrier between the home's attic and other rooms. It has a higher R-value than standard fiberglass insulation, has the highest Class-1 fire safety rating, is resistant to mold and pests, and is eco-friendly! The blanket of insulation will create a thermal barrier and help keep the home more comfortable and efficient — which will lead to year-round savings for the homeowner!

After a raccoon infestation had ruined this homeowner's attic insulation in East Brunswick, NJ, she called Cowleys to remove the old insulation and replace it with Trusoft blown-in cellulose insulation. 

Previously, our nuisance wildlife team had successfully & safely removed all the raccoons from the home and properly sealed up all the access points. So what we did was carefully remove all the contaminated insulation and then vacuumed and disinfected the attic. Next, we added TruSoft blown-in cellulose insulation, which will fill the attic to its recommended insulation levels. TruSoft blown-in cellulose insulation has a higher R-value than standard fiberglass insulation, has the highest Class-1 fire safety rating, is resistant to mold and pests, and is eco-friendly!

An East Brunswick homeowner contacted Crawl Space Solutions by Cowleys to inspect her “CleanSpace” that had been installed by another company ten years ago. She was concerned because one of the Everlast vent cover doors “looked funny.” Upon arrival, we immediately saw that the homeowner was right, and it was a good thing she called us. Because the door was was not installed properly, it was bowing out in the middle and not sitting flat on the foundation wall. This was a potential problem because it allowed damp, humid outdoor air to flow into the crawl space. 

When it comes to any home improvement, the installation is just as important as the product. The Crawl Space Solutions by Cowleys crews have extensive home building and improvement experience. 

For this Rumson homeowner, we removed the old, damaged Everlast door and installed a new one — but this time correctly! These Everlast vent covers are an important part of the encapsulation process because close off outside air and moisture from entering the crawl space through the exterior vents. They can be installed against wood framing or masonry, work exceptionally well, and are aesthetically pleasing. Made with a hard durable plastic, they stand up to the worst weather conditions, and, unlike wood vents, these covers are completely maintenance free. They should never rot, warp, or crack and they never need to be painted. With this Rumson home, the warping was caused by improper installation, not because of the door itself. Also, even though these vent covers completely seal the vents from the outdoor elements, they are easy to open should you need to access your crawl space. All you need to do is twist a few easy-to-grip knobs, and you’re in!  

This homeowner was pleased to know that, after ten years, her encapsulated crawl space, besides the one vent door that needed to be replaced, was in tip-top shape. After she thanked us for replacing the door, we were on our way to help fix a crawl space for another customer.

An East Brunswick homeowner contacted Crawl Space Solutions by Cowleys to enlarge their existing crawl space opening. Although we specialize in converting problem-ridden vented crawl spaces into clean, dry encapsulated crawl spaces, our technicians have the experience to handle virtually any crawl space renovation work. This Brick homeowner was faced with a serious issue: His current crawl space opening was so small that a person of normal dimensions could not possible fit through it.

We installed a new crawl space entrance way by removing the concrete block, installing a new wood frame, and making a custom door for easy access.
We also custom-made a vent cover that we installed into one of our vent blockers. This was one of our smaller jobs, but for this homeowner, it was an important one. After all, a homeowner must be able to have ready access to their crawl space. Crawl spaces are prone to all sorts problems, from moisture to mold to insect and wildlife infestations. It is critical to have access to this often-neglected area of the home to periodically inspect for problems and to make the necessary repairs.

Here are some “before and after” exclusion pictures that I had taken as part of a job to resolve a mouse infestation for a homeowner in East Brunswick, NJ. When dealing with rodents, it is critical to determine how they are gaining access inside the home. You can go ahead and set up bait traps and apply applications to deal with the mice inside the home, but to permanently resolve the problem and prevent re-infestations, you need to locate the entry points used by the mice to gain access into the home. Sometimes you know they are actual entry points because of nearby rodent activity near the gap or crack. For example, if you find tiny, dark pellet-like droppings or smelly urine near the gap or crack, you are pretty much guaranteed that some mice availed themselves of the opening to gain access into the home. Other times during the inspection, the technician may find potential entry points that need to be sealed. 

Finding the gaps and cracks can sometimes be a challenge. Mice are tiny creatures and they can fit through a hole the size of a dime. A good inspection requires a thorough visual of the home’s entire foundation. Often, mice enter into the crawl space or attic and then use wall voids to maneuver their way around the home, eventually making their way to the kitchen to forager for food. Sometimes, the gaps are small and it takes a lot of detective work to find them. However, there are occasions where you’ll find a huge gap that for a mouse would be the equivalent of the Holland tunnel! That was the case here. With this home, there was a huge gap around a utility pipe entering the home. The gaps around pipes and wiring entering the home are always treated as one of the “usual suspects” to check when looking for rodent entry points. Here, you can see the large gap around the pipe.

To seal this gap, I filled it with chew-proof copper mesh. Rodents are persistent creatures that can tear and chew there way through many materials. For example, using caulk to close gaps is never enough. With the copper mesh firmly in place, this access point for mice has been permanently blocked.