Cowleys Pest Services Before & After Photos

A homeowner in Jackson, NJ had an unsuspecting visitor take up residency in her home — a raccoon! She called our office for help and we were sent out to find out how the raccoon got into the attic and safely remove it.

Moments into our inspection, we noticed that a portion of the soffit was ripped open and there was raccoon hair stuck in the opening. This was the main access point. We temporarily enclosed the area with hardware cloth and installed a one-way device over the access point. The one-way device allows the raccoon to safely leave the attic but prevents it from getting back in. We also placed several baited devices nearby.

A short while later, we safely retrieved the raccoon, relocated it to a new, humane environment, and disinfected the attic area. Lastly, we sealed up the access point with sturdy metal flashing to prevent reinfestation. 

This homeowner in Sayreville contacted Cowleys to resolve a raccoon infestation in their attic. The raccoons were nesting right above the dining room, and even chewed through the wiring connecting the chandelier. One of our wildlife technicians performed an exclusion, which is  locating, repairing, and sealing the wildlife entry points. He also cleaned up the droppings, which are a bio-hazard, containing disease-transmitting microorganisms. Homeowners should not come into contact or even breathe the air in a small enclosed space where there are droppings since they can contaminate the air. To safely clean wildlife droppings, you must wear a respirator and use proper protective equipment. 

Raccoons are large, aggressive animals that can easily weigh up to 20 pounds. Their clawing and waste materials, as these homeowners found out, can cause extensive attic damage, including destroyed insulation. After the wildlife was taken care of, a Cowleys installation crew arrived soon thereafter to repair the attic and make it as good as new. We first removed the contaminated insulation, then sanitized and deodorized the entire attic to remove all traces and smells of a raccoon infestation. it is important to thoroughly clean the attic not only to remove dangerous pathogens, but also to remove the smells and remnants of the infestation, which can be an attractant to other raccoons and wildlife.

Finally, we installed brand new R30 fiberglass batt insulation, the same type of insulation that the customer had prior to the infestation. Cowleys recommends blown-in cellulose insulation for a variety of reasons, and most customers ask us to install our TAP Pest Control Insulation. Its paper fibers are treated with a borate solution that is a barrier for many insects, including ants, beetles, and termites, stopping them dead in their tracks. Also, cellulose insulation has excellent thermal properties and, because it is blown in rather than cut to size, this type of insulation ensures that all areas of the attic are actually covered, even the smallest nooks and crannies. 

However, some homeowners still prefer traditional fiberglass batt insulation, and Cowleys is happy to install that type of insulation as well. This homeowner decided to go with what product he knew from his own experience. 

A commercial facility in Egg Harbor Township, NJ, nearby Atlantic City, was having an on-going problem with birds gaining access to a tool storage area of the building. The manager contacted Bird Solutions By Cowleys to resolve this bird infestation once and for all.  

Our two-man crew inspected the area to determine how the birds were gaining access. It did not take us long to find the opening. The problem was a gap above an I-beam that gave the birds wide open access. To restrict the bird from further entry, we constructed a bird barrier by closing this space off with hardware cloth. With this access point permanently closed, birds will no longer be able to enter this space and make a mess of things.

After we successfully retrieved all wild squirrels in this homeowner's attic and then relocated them to a new, humane location, we returned to repair the damage. 

Originally, the squirrels were gnawing on the fascia board, chewed a tiny hole, and entered the attic. We completely deodorized and sanitized the attic area and then turned our attention to the fascia board. We sealed the access point with metal flashing and secured it in place with a premium sealant made up of terpolymer technology. Next, we painted the metal flashing to blend in with the color of the home so that the repair work won't be an eyesore.

After successfully removing all the mold out of this homeowner's crawl space in Metuchen, NJ, we're back to encapsulate it. First, we leveled the ground for proper draining and installed drainage matting. This material is a dimpled plastic mat that allows all excess moisture to work its way over to the sump pump. Once we finished, we installed a vapor barrier which is a heavy-duty, 20-mil 7-ply sandwich of high and low-density polyethylene with a polyester-cord reinforcement. It cannot tear and is extremely durable. The vapor barrier is also treated with an antimicrobial to prevent mold and is installed over the foundation walls and floor to create a continuous air and moisture barrier.

Next, we installed SilverGlo™ on the walls of the crawl space. SilverGlo™ is a waterproof foam insulation that seals the walls from outside moisture and humidity. Lastly, we installed a Sani-Dry Sedona commercial-grade dehumidifier to control the humidity levels. The Sedona directs the extracted water pulled out of the air directly into the sump pump. Now the homeowner will no longer have any mold issues in his crawl space and have additional space for storage!