Squirrels damage fascia - Squirrel & wildlife removal in Bradley Beach

This Bradley Beach homeowner had damage to his facia board that was caused by squirrels. The fascia board on a house is the vertical finishing edge that caps the end of the rafters, and is often where the home’s gutters are attached. Squirrels had chewed and clawed their way right through fascia. 

Another common trouble spot around the roof often damaged by wildlife is the soffit. The soffit is the finished wood or vinyl horizontal underside (water-resistant vinyl is preferable) beneath the overhanging section of the roof eave. Soffits, which have small holes to help ventilate the attic, are often a magnet for attracting small animals and insects.

A Cowleys wildlife technician had already resolved the squirrel issue, and I was called in to do the repair and exclusion work. Cowleys has a crew of technicians with extensive experience in home construction. Our projects include installing TAP insulation, waterproofing crawl spaces, treating mold, and repairing damage caused by wildlife.

The homeowner was insistent that he did not want the expense of removing his gutters, replacing the damaged fascia board, and re-installing the gutters. So, I took a more expedient approach that would leave the fascia in place. First, I needed brown aluminum to match the brown fascia board. This was easier said than done. It was a challenging job. In order to do this, I had to remove the supports for the gutter, and I had to do this a section at a time so the gutter would not fall. While the supports were off, I slid the the brown aluminum between the gutter and the fascia board to cover the damaged areas.

The next step to this process was to install a white sheet-metal drip edge. The drip edge is flashing installed along the edge of eaves. To install it, I slid the edging up under the shingles and carefully bent it so that it would wrap down on top of the brown aluminum layer. To fit the drip edge to size, I used tin snips, and allowed an overlap where the two pieces of drip edge meet so there would be no gap where water could potentially seep through. 

A drip edge is an important part of roofing that is often overlooked or not understood by homeowners. This drip edge is what gives a finished look to the roof and it also goes long way preventing rainwater from causing damage to the wood building materials near the roof. The drip edge helps keep out rainwater by preventing blow-under leaks caused by wind-driven rains and by directing rainwater into the gutter instead of running down the fascia where water, over time, can wreck havoc. 

A drip edge also helps prevent wildlife infestations. Moisture and water intrusions easily ruin wooden facia boards, and as this homeowner found out, fascia that weakened and softened by rain is also an open invitation for many types of wildlife like squirrels and raccoons to gain access inside the attic. These animals can rip and claw their way through weakened fascia like it was butter.Finally, a drip edge acts as a support for the shingles so they are not just hanging off the edge of the roof.